Practical basics

Chute & corral maintenance

Simple checks that keep equipment working. Follow your operator’s practice.

Before you work cattle

  • Grease every zerk with any standard grease from a grease gun
  • Use white lithium grease spray on rollers and other pivot points without a zerk
  • Grease about every 500 head and at least twice a year
  • Check bolts, pins, and latches — snug and secure
  • On hydraulic units, look over hoses and fittings for wear or leaks. If a hose wears, replace it with a matching hose from a local hydraulic shop, then bleed the air by working each lever all the way in and out a few times.

Before service

  • Engine off; unplug 110V units; turn the breaker off on 220V units
  • Work the levers to bleed off pressure
  • Never check for leaks with your hand

Keep the floor clear

Self-cleaning rebar floors work best when manure and buildup are cleaned out regularly so cattle have solid footing.

Paint and finish

Touch up nicks in the powder coat with any good outdoor enamel when you notice them so bare metal does not sit exposed longer than it has to.

These are quick basics. For the full maintenance schedule, see your owner’s manual. Questions? Email info@rrlivestock.com.

Contact

Francisco Rempel (Owner): 903-669-4433
Jeffery Rempel (Sales): 903-304-9324
Matthew Pounds (Sales): 334-590-7535
Email: info@rrlivestock.com